Felt Brooch Zipper Pulls: Choose the Right Connection and Care for Your Tools

Felt Brooch Zipper Pulls: Choose the Right Connection and Care for Your Tools

A felt accessory brooch is a small, light piece: usually a layered wool or wool-blend felt shape, sometimes with embroidery, a bead cluster or a stitched edge, and a pin back on the reverse. Turning one into a zipper pull means adding a connection that suits felt's softness, the weight of the brooch and the repeated tugging a zipper tab receives. That same small project also gives you a good reason to look after the tools afterward, because a needle, awl, punch or pair of snips that has been through thick felt and metal findings needs a moment of attention before it goes back in the drawer.

Start with the connection, not the decoration

The zipper pull is a working part. It has to pass through or attach around the slider tab, stay put during use and feel comfortable between fingertips. Felt is not structural, so the connection needs to spread its pull across a reinforced area of the brooch rather than tug at a single soft point. The most reliable arrangements combine a metal or sturdy cord loop with a felt tab or reinforced eyelet, and each has a slightly different job.

Split rings and small swivel clasps

A split ring sized to the zipper slider tab is a practical base. The ring passes through the tab, and the felt or a short cord loop hangs from it. Split rings are available in a range of internal diameters, and the one you choose has to clear the thickness of the slider while still being small enough not to look clumsy. A small swivel clasp or lobster clasp does the same job with a quicker release; it makes the pull removable for washing or for moving between garments. Check that the clasp's opening is wide enough to pass the slider tab, not just the felt loop.

Cord, ribbon and felt loops

A folded ribbon or firm cord loop threaded through the slider and stitched into the felt is simple and light. The loop's finished length controls how far the pull hangs, and a shorter loop tends to catch less on pockets and nearby zips. Felt itself can form a loop if it is cut as a narrow strip, folded and stitched securely; the layered fold gives more strength than a single thickness. For a brooch conversion, a short felt tab with a metal eyelet or a small grommet gives the cord a smooth bearing surface, so it rubs against metal rather than fraying the felt hole.

Pin-back considerations

If the brooch keeps its pin back, decide whether the pin is the attachment or simply decorative. A pin back is not a reliable zipper connection on its own: the pin can open, the bar can slide, and the brooch can drop off in a bag. Use the pin to fasten the brooch to a garment and add a separate, permanently stitched loop or ring for the zipper. Alternatively, remove the pin from the zipper version and keep the back flat so it hangs cleanly. That choice affects how the felt is reinforced, so make it before you start stitching.

Reinforce the felt where the pull meets the brooch

The weak point is rarely the ring; it is the felt around the hole or stitch line. Wool felt has a dense, interlocked surface that resists fraying better than many woven fabrics, but it still stretches and can tear at a concentrated load. Back the attachment area with a small patch of firmer felt, interfacing or a scrap of closely woven fabric, stitched to the reverse before the decorative layers go on. Place the patch so it sits behind the loop or eyelet, and stitch through all layers around the connection point.

  • Cut the reinforcement patch at least a little larger than the loop's footprint so the load spreads into sound felt.
  • Sew a box-X or a double row of backstitch around the base of the loop rather than a single line of running stitch.
  • If using an eyelet or grommet, choose one whose barrel length matches the combined thickness of the felt and reinforcement, and set it with the matching setting tool.
  • Keep beads, charms and heavy embellishments away from the connection area, where they can abrade the loop or add unnecessary weight.

Match the connector to the zipper as well as the brooch. A fine dress zip, a chunky coat zip and a bag zip have different slider tabs, and a ring that fits one may not pass the others. Test the ring on the actual garment before the brooch is finished; a split ring can be opened with two small pliers and closed again, but repeated opening weakens the ring and scratches the finish.

Choosing findings that suit felt

Findings for felt accessories need smooth edges, sensible proportions and a finish that suits the piece. Thin jump rings, sharp-edged charms and stiff wire can cut into felt over time, so look for rings with a rounded profile and avoid overfilling the loop. A short length of leather cord or waxed cotton can be gentler than metal chain against felt, and a fabric-covered loop is softer still for a child's bag or a light jacket. For a coordinated gift set, match the ring finish and cord colour across several brooches so the set reads as one design rather than a collection of unrelated parts.

A small repair kit for the project is worth assembling: two flat-nose pliers for opening split rings, a tapestry or chenille needle for thick felt, a sharp awl for starting holes, and a fine snips for trimming thread. These tools make the connection neater, and they are also the tools that benefit most from a few minutes of care after the task.

Care for the tools after the task

Felt work leaves lint, fibre dust and tiny clippings, and metal findings leave a little handling residue on pliers and snips. Wiping tools down and storing them cleanly keeps their cutting edges and jaws working properly for the next project. The routine is short, but it is easier when you do it before the tools go back into their case.

Needles and pins

Wipe needles and pins with a dry cloth or a lightly oiled rag, then check for bent shafts or burred points. A needle that has been pushed through dense felt and a reinforced eyelet area can dull or bend; replace it rather than forcing it, because a bent needle makes uneven stitches and can break in the work. Store needles in a pin cushion or a closed needle case so they do not pick up lint or rust in a damp room.

Pliers, awls and snips

Brush fibre dust out of the jaws of flat-nose pliers and the hinge area, then apply a single drop of light machine oil to the pivot and work it in. Wipe away the excess so it does not transfer to findings. Wipe awls clean and check that the point is still sharp; a blunt awl stretches felt instead of parting it. For snips, brush the blades clean, remove any fibre trapped near the pivot, and close them fully before storing them in a sheath or a drawer divider so the edges are not knocked against other tools.

A place for everything

A shallow compartment box or a zipped tool pouch keeps pliers, snips, awls and needles separate and visible, so you can see at a glance what needs cleaning or replacing. Keep a small cloth and a bottle of light oil with the kit, and put a spare needle or two in the same place. That arrangement shortens the next project's start-up and prevents a dull blade or dirty jaw from damaging a delicate finding or a soft felt edge.

A felt brooch zipper pull comes together through two decisions: a connection that spreads the load into reinforced felt, and a tool-care habit that keeps your pliers, snips and needles ready for the next small accessory. Match the ring or loop to the actual zipper, reinforce the felt where it counts, and clean the tools before they go back in the drawer.

Back to blog

Useful Supplies for This Topic

Bring the useful supplies for this topic together and prepare a more organized, enjoyable next project.

Supplies, practical uses and Amazon links
SupplyWhat it helps withView
Small-parts organizer boxesSeparate beads, findings and other small craft components.Amazon
Jewelry-making pliers setGrip, bend and cut suitable jewelry components with dedicated tools.Amazon
Sewing measuring tapeMeasure fabric, curved surfaces and project dimensions.Amazon

As an Amazon Associate I earn from qualifying purchases.

Explore Our Digital Guides

Follow a clear plan for organizing, making and finishing your next project with our practical digital guides.