From pattern pieces to a clear fabric plan

Fabric & Sewing Project Planner

Plan rectangular fabric pieces, compare cutting directions, and work out how much fabric to prepare or buy. Keep main fabric, lining and extra layers separate, then take a clear cut list to your next sewing session.

Use the rectangular pieces from your chosen pattern. Width goes across the fabric; height follows its length. Quantities are per project, and Copies multiplies the cut list.

1. Your project

Finished-rectangle mode adds the same seam allowance at all four edges. For shaped hems, different allowances or cut-on-fold pieces, enter the full cut rectangles specified by your pattern and choose allowances already included.

2. Your cut list

Use up to eight piece groups and three fabrics. Each group occupies its own cutting band.

Fabric A

Use the prepared width you will cut. Reserved edges are excluded from the cutting area. Extra length and purchase rounding are added after the cutting layout is calculated.

Your fabric plan

Make the next cutting session clear

Total cut pieces
—
Fabrics used
—
Checklist complete
—

Enter the pieces and fabric widths, then calculate your plan.

Your cut list

Piece / fabricCut rectangleQuantityPlacement
Calculated cut sizes will appear here.

Preview a cutting layout

Preview shows the cutting bands before extra length and purchase rounding.

Your project checklist

Tools and Materials for This Project

Prepare measuring, cutting and finishing tools for the method you choose. Compare fabric formats and panel sizes with your own cut list when selecting materials.

As an Amazon Associate I earn from qualifying purchases.

Follow the Project Through to the Finish

Use our digital guides for sewing methods, patchwork projects, fabric accessories and practical finishing steps.

Browse our digital guides →

Fabric & Sewing Planner FAQ

When should I add seam allowance?

Use Finished rectangles when your dimensions exclude seam allowance. The planner adds the chosen allowance to both sides of each dimension. Use Cut rectangles when your pattern already gives the full cut sizes.

How are different fabrics calculated?

Each fabric group has its own width, reserved edges, end allowances and available length. The planner creates a separate cutting and purchase plan for each group.

How does turning a piece change the layout?

A quarter turn swaps width and height. Enable comparisons only for pieces your pattern allows to turn. Direction-locked pieces retain their original orientation.

What kind of layout does this calculate?

Each rectangular piece group uses a separate band of regular rows and columns. The comparison chooses the shorter valid orientation for each unlocked group. Mixed-size nesting and irregular pattern outlines need their own pattern layout.

How are extra length and existing fabric handled?

The planner adds your extra-length percentage to the base cutting length, deducts the length already available, then rounds the additional purchase to the increment you select.

What about different hems, directional prints or pieces cut on a fold?

Use the full cut rectangles and required counts from your pattern, with allowances already included. Keep direction locked when needed. The layout plans one flat fabric layer.