Bookplates in an Accordion Journal: Planning the Whole Object

Bookplates in an Accordion Journal: Planning the Whole Object

An accordion journal opens like a strip of paper and keeps opening, so a bookplate pasted onto the first panel has to survive more handling than a bookplate tucked into a conventional sewn notebook. Bookplates mark ownership, usually on the inside cover, while accordion folds create a page structure that flexes and concertinas. Both facts belong in the plan before you cut paper or print a label. Planning the life of the object means thinking past the making session: how the book will be stored, how often it will be opened flat, whether the bookplate sits against a fold, and whether the paper you choose for the plate tolerates adhesive without cockling. That early thinking saves a remake and produces a journal that feels finished rather than assembled in a hurry.

Start with the accordion structure, not the decoration

An accordion book is a continuous strip folded in alternating directions, so the visible panels alternate between front-facing and back-facing surfaces. If you plan to place a bookplate, decide first which panel is the inside front cover and whether that panel is a fold valley or a fold mountain when the book is closed. A plate applied across a fold will crease every time the journal opens, which is an unhelpful place for a stiff label. Keep the bookplate on a flat panel, ideally one adjacent to the first fold rather than centred on it, and leave a margin of at least the width of the plate's border from any fold line.

The strip's total length determines the number of panels and therefore how many places a plate could sit. Work out the panel count by dividing the usable strip length by the panel width, then decide whether the bookplate belongs on the first panel, the inside back, or a designated title panel. Because accordion books often have no spine or cover board to protect the plate, choose a panel that will not rub against the cover when the book is folded shut.

Paper weight, stiffness and grain

Bookplates are usually printed on paper or cardstock, and the same paper language applies here as elsewhere. A heavier paper is not automatically better. A 160 gsm card can be stiff and resistant to a fold, while a 120 gsm smooth paper may lie flatter and take a printed name more crisply. Stiffness depends on fibre, sizing and grain direction, not grams per square metre alone. For a plate going onto an accordion panel, a moderately stiff paper that lies flat without curling is more useful than the heaviest card available. Check the grain direction by flexing a scrap: paper bends more easily along the grain, so a plate cut with its grain running the long way is less likely to curl at the edges.

Match the bookplate to the adhesive and the page

The bookplate's purpose is to identify the journal's owner, so the join must stay tidy over the object's life. Water-based glue can swell paper fibres and cause a lightweight plate to wrinkle or cockle. A thin, even application of a pH-neutral paste or a repositionable adhesive sheet can keep the plate flat, but repositionable adhesives may not hold permanently. For a bookplate that should remain fixed, a small double-sided adhesive sheet or a thin film of archival-quality paste spread evenly with a brush is a practical choice. Press the plate under a clean weight while it dries so the panel does not warp.

Consider the paper of the accordion strip itself. A lightweight cartridge paper may absorb moisture from the adhesive and buckle, showing a visible ghost around the plate. A slightly heavier mixed-media paper or a smooth drawing paper gives a more stable surface. If you plan to write on the panel around the plate, choose a paper that takes ink without feathering. Test adhesive and ink on an offcut of the same strip before committing to the first panel.

Plan the name and the mark

A bookplate is often printed with a name, a small motif or an ex libris line. Decide whether the plate will be handwritten, stamped or printed, because that choice determines paper smoothness and ink. A stamp needs a surface with enough tooth to hold ink evenly; a fine-liner pen needs a smooth, sized sheet. If you are making several journals as gifts, a small set of matching printed bookplates is a coherent production step. Print or write the plates before trimming to final size so the border stays even, and cut them with a sharp blade against a metal ruler rather than scissors for a clean edge.

Think about the object's full life before choosing the format

An accordion journal is often used for a single trip, a sketch series or a memory project, and it may be stored flat, folded, or stood open as a display. That storage pattern affects the bookplate's durability and the journal's finishing. If the journal will live in a drawer or on a shelf, a plate on the outside of the first panel is decorative and vulnerable. A plate on the inside of the first panel is protected when the book is closed. If the journal will be displayed open, a plate on the first visible panel reads clearly but collects dust, so choose a smooth paper that can be wiped gently and avoid a deeply textured plate that traps particles.

Planning the full life also means deciding what happens when the journal is full. An accordion book has no removable pages, so the plate is permanent. If the journal may be passed on, a bookplate with a name written in ink is a small commitment, while a printed label with a space for the recipient's name keeps the door open. Either way, the decision belongs in the planning stage, not after the first panel is glued.

Allowances, folds and finishing touches

Accordion construction needs consistent panel widths. If each panel is 10 cm, cut the strip to a multiple of 10 cm plus a small trim allowance, then score every fold line before folding. Score against a metal straightedge with a bone folder, pressing firmly but not cutting through. Accurate scoring keeps the folds crisp so the book stands and opens evenly. The bookplate should be cut smaller than the panel by a border that visually balances the panel, typically 1 to 2 cm all round. That margin protects the plate and gives the page breathing space.

For a sturdier journal, you can mount the accordion strip into a separate cover made from board and decorative paper. In that case the bookplate can sit on the inside of the cover rather than the first accordion panel, where it has a flat, stable home. This is still a small paper construction, not a structural installation, and the cover is a folded, glued paper object. Choose a board that is stiff enough to hold the folds open and a cover paper that adheres smoothly around the corners. The same planning questions apply: where will the plate sit, what will it be printed on, and how will it be used over time?

Tools and supplies that support the plan

  • A bone folder presses folds and burnishes the bookplate flat without marking the paper.
  • A metal ruler and craft knife produce square plate edges and consistent panel widths.
  • A cutting mat protects the work surface and keeps cuts clean.
  • A small brush and archival-quality paste give even adhesive coverage for a flat, permanent bookplate.
  • Double-sided adhesive sheets suit a quick, flat join when a wet glue is unsuitable for the chosen paper.
  • Smooth, sized paper or cardstock for the plate, with a weight that stays flat rather than curling at the corners.
  • A fine-liner pen or a small stamp for the name and motif, matched to the surface.
  • A clean weight or press keeps the plate and panel flat while adhesive dries.

These are small purchases, but they change the result. A bone folder and a metal ruler make repeated plates consistent, which matters if you are making a set for several journals. A smooth, moderately stiff paper for the plates reduces curling and gives a crisp printed edge. A small press, even a clean board with a stack of books, saves the panic of a plate lifting at one corner. Choose the supplies that support the specific join, and skip the ones that do not suit the paper you have chosen.

Make a sample plate first

Before committing the final bookplate, make one test on an offcut of the accordion strip. Apply the chosen adhesive, press the plate flat, leave it to dry, then fold and unfold the adjacent fold several times. Look for cockling, curling edges and a visible adhesive shadow. If the plate lifts or the panel warps, change one variable: a thinner adhesive layer, a different adhesive type, or a slightly heavier plate paper. This sample is the cheapest way to plan for the full life of the object without sacrificing the finished journal. Once the sample passes, cut the final plate, position it on the chosen panel, and press it under a weight until fully dry.

The result is an accordion journal whose bookplate belongs to the structure rather than being added as an afterthought. The plate sits on a stable panel, the paper and adhesive are matched to the strip, and the name is applied in a way that suits how the journal will be used. Planning the whole object at the start turns a small label into a considered part of a paper project that lasts.

Back to blog

Useful Supplies for This Topic

Build paper layers and decorative details in your next creative journal.

Supplies, practical uses and Amazon links
SupplyWhat it helps withView
Botanical collage papers and stickersBuild botanical paper layers in a journal or collage.Amazon
Scrapbook adhesive tape runnersAttach suitable paper layers neatly in a card or scrapbook.Amazon
A5 paper trimmerTrim paper pieces that fit the cutter's working size.Amazon
Ink blending toolsBlend separately selected inks across paper-craft details.Amazon
Small-parts organizer boxesSeparate beads, findings and other small craft components.Amazon

As an Amazon Associate I earn from qualifying purchases.

Explore Our Digital Guides

Follow a clear plan for organizing, making and finishing your next project with our practical digital guides.