Choosing Papers for Accordion Books with Distinct Visual Effects

Choosing Papers for Accordion Books with Distinct Visual Effects

An accordion book earns its character from contrast: the panels change as the book unfolds, and the paper you choose determines whether that change reads as a gentle sequence, a sharp rhythm or a single continuous image. Because the structure is simply a strip of paper or board scored and folded in alternating directions, almost every visual decision is a paper decision. Weight, stiffness, surface and grain all shape the finished object, and they need to be selected together rather than one at a time.

Start with the folded structure, not the cover

An accordion book is a continuous length divided into panels. Each fold line alternates mountain and valley, so the strip opens like a concertina and closes flat. The paper must tolerate repeated folding at those lines without cracking or tearing, and it must stand or lie as you intend when the book is open.

Two measurements matter more than any product name. The panel size is the finished face of one section. The cut strip is the panel width multiplied by the number of panels, plus any turn-in or mounting allowance you add at the ends for covers. If you want eight panels of 10 cm each, you cut a strip about 80 cm long before allowances. A strip that is too short cannot be corrected by folding more tightly; the panels will simply be smaller than planned.

Grain direction is the quiet decision that affects the result. Paper folds most cleanly along the grain, so the long direction of the strip should run with the grain where possible. On a short strip this is hard to notice; on a long one, cross-grain folds can fight the paper and produce a wavy edge. When you buy sheets or rolls, check the grain direction by flexing the paper gently and noting which way it curls most easily, then plan the strip so the fold lines fall with it.

Match weight and stiffness to the effect you want

Paper weight and stiffness are related but not identical. A heavyweight sheet may be thick yet soft, while a lighter sheet can feel crisp. For accordion books, the useful question is how the panels behave when the book stands open.

  • Light text paper gives many panels in a small space and folds into a soft, fluttering book. It suits a continuous drawing, a poem sequence or a book that will be handled gently and stored closed.
  • Medium cardstock is the practical all-rounder. It holds a moderate fold, accepts most dry media and light washes, and keeps panels from collapsing when the book is opened on a table.
  • Heavy card or board creates a sculptural book that stands on its own. It is harder to fold cleanly and needs generous scoring, and it limits how many panels you can manage in one strip.

A mixed-weight book is possible if you want a deliberate change of pace, but joining different papers mid-strip creates a hinge that behaves differently from the folds. A simpler route is to keep one paper for the structural strip and vary the surface effect with mounted panels, pockets or overlays.

Choose surfaces for the visual result

The surface decides how ink, paint and collage sit on the page. For a sharp graphic look, a smooth, sealed or coated sheet keeps lines crisp and resists feathering, but it may reject watercolour and some gel mediums. For a soft, absorbent look, an uncoated paper takes pencil, pastel and ink washes with more texture, though wet media can cockle the panels.

Test on an offcut before committing to the whole strip. A quick test tells you more than any label: draw a line, apply a light wash, press a piece of tape and lift it, and fold a scrap in both directions. This is not a formality. Coated papers, textured papers and coloured papers behave differently under the same pen, and a book with eight panels gives you eight chances to discover a mismatch.

Colour choice also shapes the reading of the book. A single background colour carried across every panel makes the unfolded strip feel continuous, so images can flow across fold lines. Alternating light and dark panels create a rhythm that suits a sequence of separate small works. If you plan to collage, choose a base paper that contrasts with the pieces you will add; a busy printed base will swallow small details.

Coordinate covers, liners and closures

The covers are usually separate boards attached to the first and last panels, or a wrap that folds around the closed book. Cover board should be stiffer than the text strip so the book keeps its shape in a bag or on a shelf. A common approach is to use a firm greyboard or heavy card for the covers and cover it with a decorative paper, cloth or painted surface.

Leave an allowance at each end of the strip for attaching the covers, and make sure the cover board is slightly larger than the panel if you want a protective border. The spine gap between cover and text should match the thickness of the folded book; too tight and the book will not close flat, too loose and the covers will feel sloppy.

Closures are where material choice becomes practical. A ribbon tie needs a paper that will not split when the ribbon is pulled. A magnetic closure needs a concealed stiffener so the magnet does not crease the cover paper. An elastic band works best with a cover that has some rigidity, because a limp cover will buckle when the band is stretched around it. Choose the closure with the paper in mind, not after the book is covered.

Select tools that support the paper

A few tools make the difference between a clean fold and a cracked one. A bone folder compresses the fold without bruising the surface, and a scoring tool or the back of a craft knife creates a shallow line that guides the fold along the grain. A metal-edged ruler and a cutting mat keep the strip square, which matters because a slight taper accumulates across many panels.

For assembly, choose an adhesive that suits the paper weight and the amount of moisture it can tolerate. A thin paper will cockle under a wet glue, while a heavy board may need a stronger bond. Water-based adhesives are convenient for porous papers but can warp thin sheets; double-sided tape is clean and dry but less forgiving if you need to reposition. Test the adhesive on an offcut of the same paper and let it dry fully before you judge the result, since some adhesives darken or wrinkle the surface as they set.

If you plan to print on the panels, check that the paper is appropriate for your printer and that the sheet size matches your planned strip. Printing a continuous image across fold lines requires the image to be laid out so that each fold falls in a sensible place; a fold through a face or a line of text rarely looks intentional.

Build the book around one clear effect

The most satisfying accordion books are not the ones with the most materials but the ones where the paper supports a single idea. A delicate book of translucent panels wants light paper and a simple ribbon. A bold display book wants stiff card, strong colour and a closure that holds it open on a shelf. A gift book wants a cover paper that feels good in the hand and a text paper that takes a handwritten message without bleeding.

Decide the effect first, then choose weight, surface and grain to serve it. Cut a test strip of the actual paper, score and fold it, and open it on the table. If the panels stand, flutter or drape the way you imagined, the paper is right for the book. If not, the structure is still easy to change at this stage, before the covers and closures lock the choice in place.

Back to blog

Useful Supplies for This Topic

Bring the useful supplies for this topic together and prepare a more organized, enjoyable next project.

Supplies, practical uses and Amazon links
SupplyWhat it helps withView
A5 paper trimmerTrim paper pieces that fit the cutter's working size.Amazon
Scrapbook adhesive tape runnersAttach suitable paper layers neatly in a card or scrapbook.Amazon
Small-parts organizer boxesSeparate beads, findings and other small craft components.Amazon

As an Amazon Associate I earn from qualifying purchases.

Explore Our Digital Guides

Follow a clear plan for organizing, making and finishing your next project with our practical digital guides.