Give Remote Controls a Home They Return To: Planning Around How Many Small Electronics You Actually Have

Give Remote Controls a Home They Return To: Planning Around How Many Small Electronics You Actually Have

Remote controls and small electronics drift because they have no settled place to go back to. A coffee-table remote ends up under a cushion, a charging cable slides behind the sofa, a game controller lands on a stack of magazines. The fix is not a bigger tidy-up session; it is an arrangement designed around the number of devices you actually keep in the room, so returning each one after use takes one motion and no decisions. Count first, then choose the container, then place it where the return trip already happens.

Match the container to the real device count

The most common planning error is choosing a tray or caddy by its attractive exterior size and then discovering the usable internal space is smaller. Outer dimensions include walls, handles, lids and dividers that eat into the floor area. Measure the flat footprint inside the container, then compare it with the devices.

A rough working inventory helps. A typical living-room set might be three remotes, one streaming stick remote, two game controllers, a pair of headphones and a charging cable. Laid out flat with a finger-width between them, that group needs noticeably more width than a single stack of remotes suggests. Do the same count per room: a bedroom may hold only a media remote and a sleep-timer remote, while a family room may hold a games console controller, a TV remote, a soundbar remote and a spare.

Count the devices that live in the room, not every remote in the house. Then add one empty slot. The spare slot absorbs new arrivals without forcing a redesign, and it gives the arrangement breathing room so nothing has to be wedged in.

When a shallow tray is enough

A shallow tray with a low rim suits a small group of flat remotes used on one sofa or one chair. The rim keeps them from sliding, the open top keeps every button visible, and dropping a remote back in takes no more effort than setting it on the table. Look for a tray with a felt or cork base if it will sit on a polished wooden surface, and check that it does not rock on the tabletop.

When a divided caddy suits better

Once the group includes controllers, headphones or a charging cable, a caddy with compartments and a handle earns its place. Dividers keep bulky controllers from crushing thin remotes, and a handle lets the whole group move to a shelf or cupboard when the room is reset for guests. Check the internal depth against the thickest item. A controller standing upright in a deep compartment is easy to grab; the same controller jammed under a low lid is not.

Separate what charges from what is simply stored

Small electronics differ in whether they need power while stored. Remotes usually sit idle and only need a home. Controllers, earbud cases and tablets need charging cables nearby, which changes the container.

For devices that charge, a caddy with an open side or a cut-out at the rim lets a cable pass through without pinching. Alternatively, place the charging caddy on a shelf beside an existing socket and keep the cable permanently routed to one compartment. That way the cable has a settled position, and returning a controller means plugging it into the cable already in place rather than hunting for a loose lead.

Do not assume a closed decorative box will suit a device that gets warm or needs ventilation while charging; keep charging devices in an open or well-ventilated container, and separate the charging area from the storage-only area. A simple two-part arrangement works well: a shallow open tray for remotes, and a lidded or handled box for cables, chargers and accessories that are not in use.

Place the home where the return already happens

Return effort is the deciding factor. A container on the far side of the room will be skipped even by people who intend to tidy. Watch where remotes are actually set down at the end of an evening, then place the container within reach of that position.

  • Sofa or armchair zone: a tray on a side table or a caddy tucked beside the armrest catches remotes as they are put down.
  • Media wall or low shelf: a divided box on the shelf below the screen keeps controllers and remotes out of sight but close to the screen.
  • Desk or bedside: a small tray on the surface holds one or two devices and stops them sliding behind the desk.

Check what the container must clear. A door swing near an entryway shelf, the front edge of a drawer, a curtain that draws across a side table and the depth of a shelf can all interfere with the chosen spot. If the caddy has a lid, allow headroom to lift it. If it slides out of a cubby, allow room for fingers at the sides. A container that fits the surface but cannot be opened or reached is not a usable home.

Choose dividers and organisers by device shape

Within the container, the useful question is whether devices need to be kept separate or can share a bay. Thin remotes do well in a row of upright slots, where each is visible by its top edge. Controllers are bulky and irregular; give them a wider bay and let them stand or lie as their shape allows. Headphones need a hook or a bay deep enough not to press on the earcups. A small fabric or felt divider set lets you adjust bay widths without buying a new container when the device mix changes.

For very small items such as earbud cases, memory cards or adapters, a lidded compartment or a small tray inside the caddy prevents them from slipping between larger devices. Label compartments only if the household includes several people with similar remotes; otherwise the visibility of the row does the labelling.

Reset the arrangement when the device count changes

Small electronics accumulate. A new controller, a replacement streaming remote or a second pair of headphones can overload a container that was well planned for the previous set. Once the tray is full to the rim, returning a device requires lifting others, and the arrangement fails.

Plan for change by sizing the container for the current count plus one slot, and by keeping the container category simple enough to add to. An open tray can gain a second matching tray side by side. A modular caddy can gain a bay. Both are easier than replacing a carefully measured one-piece organiser. Keep a note, mental or on a phone, of how many devices each room holds and which need charging, so a caddy or tray can be resized to match when the family set changes.

A return route that survives daily use

A workable arrangement has three parts: a counted set of devices, a container with enough internal footprint to hold them without stacking, and a position within reach of where they are set down. A shallow open tray for remotes, a handled divided caddy for controllers and charging accessories, and a labelled compartment for the small pieces will keep both return effort and visual noise low.

Check fit by measuring the inside of the container, not the outside, and by clearing any lid, handle, door swing or shelf edge that could block retrieval. When the set grows, add the next tray or bay rather than crowding the existing home. Returning a remote then becomes the easiest option, which is what makes the arrangement last.

Back to blog

Useful Supplies for This Topic

Bring the useful supplies for this topic together and prepare a more organized, enjoyable next project.

Supplies, practical uses and Amazon links
SupplyWhat it helps withView
Retractable tape measureMeasure usable cabinet space and compare organizer dimensions.Amazon
Clear drawer organizer traysGive stationery, cosmetics and small accessories their own compartments.Amazon
Small woven storage basketsGive a shelf or tabletop category its own easy-to-lift basket.Amazon
Phomemo D30 label makerCreate consistent labels for boxes, drawers and household categories.Amazon

As an Amazon Associate I earn from qualifying purchases.

Explore Our Digital Guides

Follow a clear plan for organizing, making and finishing your next project with our practical digital guides.