Make Remote Controls and Small Electronics Easy to Find and Use

Make Remote Controls and Small Electronics Easy to Find and Use

A remote control is a small object with a large claim on a room. It is needed in seconds, used at arm's length, and set down wherever the hand happens to be. Chargers, earbud cases, game controllers and spare batteries behave the same way: they are frequent-use items with no natural home, so they spread across coffee tables and sofa cushions. The organisational answer is not a bigger box. It is an arrangement where each device can be seen, reached and returned with one motion, and where the charging the device depends on is part of the same place.

Start with the retrieval path, not the container

Small electronics fail at three moments: finding them, picking them up and putting them back. A good arrangement shortens all three. Work through the actual path a hand takes. From the sofa, a remote should be within reach without standing. From the doorway, a charger should be visible before leaving. At a desk, the device in use should sit clear of the keyboard while its cable stays connected.

This is why a deep lidded basket often disappoints for remotes. It holds a lot, but every retrieval is a search and every return is a lift and a drop. A shallow open tray, a moulded caddy or a divided insert in a drawer keeps the same items identifiable at a glance. Internal usable space matters more than the outside dimensions printed on a product; the floor of a tray, the depth of a compartment and the height clearance above it decide whether a remote lies flat and stays put.

Choose a surface arrangement that suits the room

Living areas usually need one shared landing place plus a way to keep cables out of sight. A low tray on a side table works when it is large enough for the remotes actually in use and has a rim that stops them sliding off. A small freestanding caddy beside the sofa can hold remotes upright, which makes each one visible and gives a defined slot for return. If the table is also used for drinks and books, a tray with a raised edge separates the electronics zone from the rest without hiding anything.

Look at these features when selecting a tray or caddy:

  • Compartment depth and width. A long remote needs a channel long enough to lie flat or a slot tall enough to stand. Measure the longest device you keep there, not an average.
  • Rim height and base grip. A shallow rim keeps items visible; a non-slip base keeps the whole tray from skating when a hand reaches in.
  • Open top versus lid. Open storage suits devices used many times a day. A lid suits spares, batteries and cables that are accessed occasionally.
  • Cable exits. If charging happens in the tray, a notch or gap lets the cable leave without pinching. A closed tray with no exit forces the charger to sit outside, which splits the arrangement.
  • Material and weight. A lightweight tray is easy to move for cleaning but slides easily; a heavier one stays put. Felt or cork liners reduce movement and soften the contact between devices and the tray floor.

Make charging part of the storage, not a separate problem

Charging is where small electronics storage most often breaks down. Cables fall behind furniture, plugs are shared, and a device left charging on a bare surface becomes a trip hazard. A dedicated charging station keeps the cable, the plug and the device in one known place.

For a shared living area, a compact freestanding charging station with a shelf or slots for devices and an organised route for cables reduces the nightly hunt for a lead. For a bedside or desk, a smaller cable organiser or clip keeps the end of the cable where a hand can find it without fishing behind the furniture. A cable tidy box hides a multi-socket extension and surplus cable length while leaving the sockets accessible; it is a freestanding container, so it can be moved and cleaned around.

The features that make these products useful are practical rather than decorative: enough internal height for the plugs and adapters you actually use, ventilation openings so the enclosure does not trap heat, a lid that lifts off or opens fully for access, and a cable exit that matches the direction the lead needs to run. Check the outside dimensions against the surface where the station will sit, then check the internal dimensions against the plugs and adapters it must hold. The two are not the same, and a box that fits the shelf may not fit the adapter.

Keep devices visible while they charge

A charging device that disappears into a drawer is out of sight and easy to forget. A station with an open front or a shallow lip lets the reader see at a glance which device is plugged in and which is ready to take. That visibility is the practical value: it turns charging from a hidden chore into a visible state.

Use dividers and small containers inside drawers

A drawer near the sofa or desk can become the main store for spare batteries, charging cables, earbud cases and memory cards if it is divided. Adjustable drawer dividers let you size compartments to the items rather than forcing everything into fixed slots. A shallow insert with several small compartments keeps categories apart: cables in one, batteries in another, adapters in a third.

Label the compartments by what goes in them, not by where they came from. A printed label or a written strip on the divider front makes the drawer self-explaining, so a household member can return an item without asking. For batteries specifically, keep them in their original packaging or a compartment that prevents the terminals from contacting metal objects; a divided tray does that more reliably than a loose pile.

Match the storage to the frequency of use

The best arrangement gives the most-used items the shortest return path. Remotes used every evening belong on an open tray within arm's reach. Spare cables and batteries used monthly belong in a closed drawer insert. Seasonal or occasional devices, such as a second controller or a travel charger, can live in a labelled box on a shelf, provided the label is visible from the front.

This hierarchy prevents the common failure of buying one large container for everything. A single box mixes daily and occasional items, so the daily items are buried and the occasional ones are never found. Two or three small, clearly purposed containers usually serve better than one big one, and they are easier to move when the room is rearranged.

Small upgrades that make the arrangement work

A few low-cost additions complete the system. A non-slip liner under a tray keeps it steady. A pack of hook-and-loop cable ties keeps each charging lead coiled and identified, so the right cable is easy to grab. A small label maker or a sheet of adhesive labels turns an anonymous drawer insert into a readable map. For devices that live on a desk, a weighted stand or a moulded holder keeps a phone or controller upright and visible rather than flat among papers.

These are not decorative extras; each one removes a specific friction point in the retrieval and return cycle. The liner stops the tray moving, the ties stop the cables tangling, the labels stop the search, and the stand stops the device from being buried. Together they make the practical value of the arrangement obvious: the reader can see what is there, reach it without rummaging and put it back without effort.

Back to blog

Useful Supplies for This Topic

Bring the useful supplies for this topic together and prepare a more organized, enjoyable next project.

Supplies, practical uses and Amazon links
SupplyWhat it helps withView
Retractable tape measureMeasure usable cabinet space and compare organizer dimensions.Amazon
Clear drawer organizer traysGive stationery, cosmetics and small accessories their own compartments.Amazon
Small woven storage basketsGive a shelf or tabletop category its own easy-to-lift basket.Amazon
Phomemo D30 label makerCreate consistent labels for boxes, drawers and household categories.Amazon

As an Amazon Associate I earn from qualifying purchases.

Explore Our Digital Guides

Follow a clear plan for organizing, making and finishing your next project with our practical digital guides.