Media Console Storage: Plan Coordinated Sets Around the Space You Have
Share
A media console is rarely short of storage space in the abstract. It is short of usable space for the specific mix of things a household keeps there: remotes, controllers, chargers, cables, spare batteries, a few game cases, headphones, hand controllers and the paper that accumulates on top. The most effective approach is to plan a coordinated set of containers around the space that already exists, rather than buying a matching collection first and then discovering it does not fit the openings or the retrieval habits.
The planning order matters more than the products. Start with the console's real internal dimensions, then decide how each zone should be accessed, then choose containers whose internal usable space suits the items. A coordinated set is only useful when every piece in it earns its place in a defined zone.
Measure the opening, not the console
Manufacturer dimensions for the console itself describe the outside. What governs container choice is the internal opening and the space behind it. Measure each bay's clear internal width, internal height and internal depth, and measure them separately, because side panels, centre dividers and cable cut-outs reduce usable space unevenly.
Then account for the things that steal room from a container. A cabinet door with a deep recessed panel or an internal hinge may leave less usable depth than the frame suggests. Doors that swing out need clear floor space to open fully; sliding doors need clear track and enough lateral room for a panel to travel. If a door opens only to a limited angle, a deep lidded box placed at the back of that bay will be awkward to reach. Measure the retrieval clearance, not just the cavity.
Cable management is part of the measurement. Many consoles have a rear cut-out or a fabric panel; a container pushed hard against the back can block or kink cables or press on a power strip. Leave a deliberate gap behind containers where plugs and adapters sit, and treat that gap as used space rather than waste.
Make a simple zone map
Sketch each bay as a rectangle and mark the clear opening, the usable depth and any obstruction. Note which bays are at seated height, which require kneeling, and which sit behind a door that opens against a wall. This map becomes the plan for the coordinated set. Bays at easy reach suit the items used daily; awkward bays suit seasonal or occasional items.
- Daily-reach bay: remotes, one controller per person, headphones.
- Seated side bay: chargers, cables, a small tray for keys or glasses.
- Lower or deeper bay: spare batteries, cables in labelled pouches, game cases in a low box.
- Top surface: a single shallow tray to corral what lands there, plus space left clear for a lamp or speaker.
Build a coordinated set from containers, not from a single brand line
A coordinated set looks deliberate because the pieces share a material, finish, proportion or colour family, and because each has a clear job. It does not require buying every piece at once or from one range. Three or four container types usually cover a media console well, and selecting them by function makes the set look coherent because nothing is superfluous.
Open trays work for items that need to be seen and grabbed: remotes, controllers, a small dish for coins. Shallow open trays are easy to slide forward and return, and they keep small items from drifting across a shelf. Closed lidded boxes suit cables, batteries and anything that should not collect dust or slip out of reach. Fabric or felt bins soften the look and are quiet to handle, though they hold their shape less well than rigid containers. Rigid baskets or divided organisers suit game cases and small electronics that need to stay upright.
Match the container's external dimensions to the bay with a small allowance for fingers. If a box fills the bay exactly, lifting it out becomes a struggle; leave a couple of centimetres of clearance on at least one side and above the lid, and choose a container with a finger notch or a lid that lifts easily. If the bay is shallow, a lidded box that is taller than the opening will not come out once filled, so check the height with the lid on.
Use dividers and inserts inside the larger pieces
The coordination continues inside the containers. A lidded cable box becomes far more useful with a few small dividers or zipped pouches inside, each holding one cable coiled and secured with a hook-and-loop strap. A deep basket of controllers benefits from a simple upright divider or a set of smaller cups so the controllers stand rather than tangle. A divided organiser for game cases or small electronics keeps spines visible and prevents the collection from collapsing into a pile at the back.
This is where a matched set earns its keep: the same pouch style for each cable, the same tray style in each bay, and a consistent labelling scheme. Repetition is what makes the arrangement look intentional and quick to maintain.
Coordinate by material and colour without overspending
A coordinated look comes from limited palettes more than from matched products. Choose two or three finishes that relate to the console and the room: for example, natural woven baskets with dark metal trays, or felt bins in one or two colours with a pale wood tray on top. Repeated shapes do the rest. If the console is dark, lighter containers make contents easier to see; if the interior is bright, darker containers hide cable clutter.
Transparency is a practical choice, not just an aesthetic one. Clear containers let you check contents at a glance and suit cables and batteries. Opaque containers reduce visual noise and suit seasonal or occasional storage. Mixing the two deliberately, clear for utility and opaque for bulky items, gives both visibility and calm.
Consider how the inside looks when a door is open. A pale, uniform interior with a tray on each shelf reads as a set even when the individual pieces come from different ranges. Avoid overfilling: a bay that is packed to the front edge makes the whole console look cluttered whenever the door is open.
Keep the top surface working
The console top is where coordination is most visible. A single shallow tray for remotes and keys, one cable catch-all at the back, and a clear run for a lamp, plant or speaker is usually enough. The tray should be wider than the scatter of items it holds, but not so large that it becomes a landing pad for everything. Keep the top surface roughly one-third occupied and two-thirds clear, or a similar balance that suits the room, so the console reads as furniture rather than a shelf.
Plan for return effort and upkeep
The arrangement fails if putting something back takes more than a moment. Every daily item needs a designated, open, reachable home with no lid and no stacking. Rarely used items can be nested or stacked more deeply. Label the closed boxes with the contents, using a consistent format, and place labels where they are visible when the box is pulled forward.
Check the plan against the cables. Chargers that live in a bay should have a cable route that does not require unplugging anything, and coiled spares should be secured so they do not unroll. If the console has a rear cut-out, feed charging cables through it to a tidy multi-socket positioned where it can be reached without pulling out every container.
Before adding more pieces, revisit the zone map. If one bay is still crowded after the first arrangement, move a category to an emptier zone rather than buying a fourth container type to squeeze into the same space. A coordinated set stays coherent when it grows with the space, not beyond it.