Organise Remote Controls and Small Electronics in a Small Living Room
Share
Remote controls, chargers, handheld consoles, earbud cases and the loose batteries that feed them tend to collect in the same few square feet of a living room, yet they resist the drawer-based logic used elsewhere. They are used constantly, handled briefly and put down wherever the hand lands. Multifunctional furniture helps because it gives these objects a home without adding another piece of furniture to the room. The trick is to treat the task as a sequence: decide which electronics genuinely live in the room, map the reach zones around each seat, then choose furniture that supplies the right kind of internal storage for those items.
Working in that order prevents the familiar mistake of buying an attractive storage ottoman or lift-top table and then discovering that its internal height, lid swing or opening shape does not suit what you actually keep there.
Start with the electronics that stay in the room
Gather every remote, charger, cable and small device that regularly ends up in the living area. Separate them into three groups by how they are used:
- In-hand controls used from a seat: television and media remotes, a streaming stick remote, a games controller, a handheld console.
- Charging and power items used near a seat or side table: cable ends, a small charging block, earbud case, power bank.
- Occasional and spare items: spare batteries, a second controller, a cable for a device that visits occasionally.
This division matters because the three groups want different levels of accessibility. In-hand controls need to be reachable without standing and returned just as easily. Charging items need a surface where a cable end can wait without sliding to the floor. Spares can live deeper in a piece of furniture and be retrieved less often.
Count each group rather than estimating. Four remotes and a controller take more room than a single tidy caddy suggests, and controllers are bulky enough that they rarely share a shallow compartment comfortably with batteries and cables.
Map reach zones before choosing furniture
Multifunctional furniture works when its storage sits inside a zone where the hand naturally goes. From a favourite seat, the most useful zone is roughly arm's length to the side or in front at seat height. The next zone is within leaning distance: a lift-top table or an ottoman beside the sofa. The least accessible zone is behind or beneath the seat, suitable for spares and occasional items.
Sketch the room and mark each seat. Note which seats share a side table and which have none. Also note the paths people walk through the room: a storage ottoman that opens toward a walkway forces the user to step around the lid, and a lift-top table placed where people pass will stay closed in practice.
Consider how many people watch from different seats. A single central caddy fails when two people on opposite ends of a sofa each want a remote. Two smaller trays or one piece of furniture with two accessible compartments often suits a shared room better than one large container.
Choose furniture by its internal storage, not its outer shape
Multifunctional pieces fall into a few practical types, and each suits a different mix of electronics.
Storage ottomans
An ottoman with a removable or hinged lid offers a large internal volume, useful for controllers, spare cables and a folded throw. Check the internal height and the lid's open position: a hinged lid that rests back needs clearance behind the ottoman, while a removable tray lid needs somewhere to be set down. A divided insert or a shallow tray that sits on top of the main compartment keeps frequent remotes from sinking into the depths. Because the compartment is deep, use it for the occasional and bulky group and keep a small tray on top or on a nearby surface for in-hand controls.
Lift-top and storage coffee tables
A lift-top table raises part of the surface toward the user, which makes a laptop or a book comfortable and also creates a compartment underneath. The compartment is usually shallower than an ottoman, so it suits remotes, cables and a controller laid side by side rather than stacked. Check that the raised top does not collide with the sofa or a lamp, and that the internal base is flat rather than crossed by bracing. A flat base accepts a shallow divided tray; a braced base needs small individual boxes instead.
Side tables with drawers or shelves
A side table with one shallow drawer is the most direct home for in-hand controls because it sits at the right height and the drawer can be opened with one hand. Shallow drawers suit remotes and earbud cases; deeper drawers need a tray or divider so small items do not migrate to the back. Open shelves suit a basket or tray that can be lifted out, but they leave electronics visible, which some rooms tolerate and others do not.
Benches and console pieces
A storage bench along a wall can hold a shallow tray on top for remotes and a basket below for cables and spares. Its value depends on the bench being close enough to a seat or on the remotes being carried to it deliberately. If the bench is behind the sofa, it usually becomes a spare-items home rather than an in-hand home.
Match containers to the electronics
Once the furniture is chosen, the containers do the fine sorting. A shallow tray with low sides lets remotes lie flat and be picked out without lifting a lid. A tray with two or three compartments separates a controller from remotes so the controller does not press buttons against them. Small lidded boxes hold batteries and spare cables, and a box with a lid keeps dust off unused ports.
Cable management matters more than it seems. A cable that disappears into a deep compartment is effectively lost. Keep the working end of a charging cable on the surface, secured with a clip or a weighted cable holder, so a device can be plugged in without opening anything. The rest of the cable can loop into the compartment below.
Check internal measurements against the actual items. A remote is typically long and narrow, a controller is thick and irregular, and a power bank is heavier than it looks. A tray whose internal depth is less than the controller's thickness will not let the lid close, however generous its outer dimensions appear.
Put the arrangement together in sequence
With furniture and containers chosen, assemble the arrangement in a fixed order:
- Place the furniture in its final position and test every lid, drawer and lift mechanism in that position.
- Fit the shallow tray for in-hand controls at the most reachable point.
- Route charging cables so the working end stays on the surface and the surplus loops into the compartment.
- Fill the lidded box with batteries and spare cables and place it in the least accessible spot.
- Return one remote, one controller and one cable to the arrangement and use it for a few days before adding the spares.
This last step catches most problems. If a remote keeps ending up on the sofa arm instead of the tray, the tray is in the wrong place or too fussy to use. Moving the tray closer to the seat solves more than adding another container.
Keep the arrangement working
Multifunctional furniture earns its place when the storage is used daily rather than filled once. A weekly moment to return stray cables and check that batteries and spares are in their box keeps the surface clear. When a new device arrives, decide which group it belongs to and place it accordingly before it becomes another object on the table. The sequence, not the furniture alone, is what keeps remotes and small electronics visible, reachable and easy to put back.