Button Closures for Simple Lounge Shorts: Getting the Waist Fastening Right
Share
Why a Button Waist Suits Simple Lounge Shorts
Simple lounge shorts are one of the most satisfying first projects in fabric sewing. They need few pattern pieces: a front, a back, a waistband and a small amount of elastic or a closure. Because the shape is loose and forgiving, the waist fastening is where most of the real construction decisions sit. That makes lounge shorts an excellent place to understand how a button closure actually works, rather than treating it as a single step to hurry through.
A button closure is not one component but three working together. The button is the visible stop; the buttonhole is the opening the button passes through; and the overlapping fabric around the hole is the structure that carries the strain. Get all three right and the shorts fasten smoothly, stay fastened during wear and sit flat over the waistband. Miss one and the waistband gapes, twists or strains even though the button itself is fine.
Choosing Between Elastic, Drawstring and Button
Lounge shorts can be closed in several ways, and each produces a different wearing experience.
- Elastic waistband: simplest to construct and most forgiving of fit variation, but it gathers fabric and can feel bulky under a tee.
- Drawstring: adjustable and comfortable, but the cords need channel space and can loosen during sitting.
- Button and buttonhole: gives a flatter, neater waist, allows a defined overlap and is the right choice when you want the shorts to look more like a tailored short than a sleep garment.
The button closure earns its place when you want a clean front line, a stable waistband and a fastening you can open and close deliberately. It also introduces you to the overlap principle that runs through shirts, skirts, bags and cushion covers, which makes the effort worthwhile.
Preparing the Waistband Overlap
A button closure needs two overlapping layers. The underlap carries the button; the overlap carries the buttonhole. On shorts, this usually means extending the front waistband on one side so it wraps over the other.
Decide the overlap width before you cut. A button roughly 15 to 18 mm in diameter needs a buttonhole with room for its shank plus clearance at each end. A practical rule is to size the buttonhole about 3 mm longer than the button's diameter, then position it so the button centres properly when fastened. An overlap of 30 to 35 mm gives comfortable room for a buttonhole of that length with margin on both sides.
For the underlap side, add interfacing to the waistband facing so the button has a firm base. For the overlap side, interface the buttonhole area too. Interfacing is not decoration: it stops the fabric stretching as the button passes through, which is the common reason buttoned waistbands become loose and untidy with wear. Match the interfacing weight to the fabric. A light cotton or linen waistband takes a lightweight fusible; a heavier brushed cotton or flannel takes a mid-weight one.
Choosing the Button
The shirt-style two-hole or four-hole button is the sensible default. A flat button with a recessed centre stitches down neatly and sits well on a waistband. Shank buttons work too, but a shank raises the button off the fabric, which is useful on thick fabric but can look fussy on a simple short. Size matters: 15 to 20 mm suits a lounge short waistband and is easy to manipulate. Buttons smaller than about 12 mm are fiddly for the wearer and demand unusually fine buttonhole work.
Material choice affects the finished look. Corozo, wood and matte plastic buttons read casually and suit cotton, linen and flannel. Shell buttons are best on lightweight, more dressy fabrics.
Sewing a Buttonhole That Works
There are two approaches: a machine buttonhole or a hand-worked buttonhole. Both are viable; the choice depends on your equipment and the look you want.
Machine Buttonholes
A machine buttonhole is the standard for most waistband closures because it is quick and repeatable. The method matters less than the preparation:
- Stitch a test buttonhole on a scrap of the same fabric with the same interfacing in place. Measure the result against your chosen button.
- Mark the buttonhole on the overlap using the button's position on the underlap as the guide. Mark the hole, not the centre of the button; the buttonhole extends beyond the button centre.
- Position the buttonhole across the waistband, oriented so the button travels along the band, not vertically down it.
- Stitch, then cut the opening carefully with a buttonhole chisel or sharp small scissors. Cut through the centre, being careful not to catch the bartack at each end.
If you use a buttonhole foot with a gauge, set it to the exact button size rather than estimating. If your machine has a one-step buttonhole feature, the machine measures the button and stitches the correct length automatically.
Hand-Worked Buttonholes
A hand buttonhole is slower but can look beautiful on a visible waistband and gives the maker more control on thick or uneven fabric. Work overcast stitches around the marked opening, then blanket-stitch the edges closely, keeping even tension and building a slight ridge at each end. Use a thread matched to the button or a contrasting one for visual interest. A hand buttonhole needs a longer opening than a machine one because the stitching itself thickens the edges.
Positioning the Button and Fastening Accurately
The usual mistake is to mark the button's position before the buttonhole exists. Instead, make the buttonhole first. Then overlap the waistband as it will sit when worn, pin, and mark the button's position through the centre of the finished buttonhole. This guarantees the button and hole line up in the fastened state, which is the only state that matters.
Stitch the button with a small shank of thread beneath it so it has room to pass over the buttonhole's edge without pulling. A shank is simply a few turns of thread around the stitches under the button before you finish. Use a double thread and go through the holes several times for strength.
What Good Fastening Does for the Finished Shorts
A well-made button closure makes the waistband read as a designed feature rather than an afterthought. The overlap stays flat, the buttonhole does not stretch open, and the button sits centred. The shorts close cleanly and stay closed through sitting, standing and everyday movement.
Get this mechanism right once and it transfers. The same logic — overlap plus interfaced buttonhole plus button centred through the finished hole — applies to a shirt placket, a tote closure, a cushion cover flap or a simple skirt waistband. The material changes, but the working principle does not. For lounge shorts, it takes a few extra minutes at the waistband and produces a finished piece that feels considered rather than improvised.