Hand-Stitched Fabric Bunting: How Historic Pennant Craft Makes Modern Seams Better

Hand-Stitched Fabric Bunting: How Historic Pennant Craft Makes Modern Seams Better

Fabric bunting turns a length of cloth into a repeatable shape: a row of triangles or pennants hung from a tape, string or binding. Hand-sewing it well comes down to choosing a stitch that survives the pull of a hanging edge and finishes both sides neatly. Historic pennant and banner making offers a useful lesson here: the makers often worked each pennant as a small, finished unit, joined edge to edge, rather than stitching one long hem and hoping it would behave. That approach solves the modern bunting problem of triangles that twist, curl or droop along the top tape.

Why bunting is a seam problem before it is a decoration

A bunting flag is a light object with a short seam on each side and one long edge that carries the hanging tension. That tension concentrates where the flag meets the tape or string. A running stitch alone, worked loosely, lets the flag edge stretch and the point sag. Historic pennants were often bound, faced or sewn with a backstitch along the stress line, because the seam had to hold a shape under movement rather than merely join two layers for looks.

For the modern maker the useful carry-over is this: choose the stitch for the seam's job. Side seams can be simple. The top join and any point that bears weight deserve a stronger hand stitch, and the flag should be finished before it is attached to the hanging line.

Stitches that earn their place on bunting

Backstitch for the hanging join

Backstitch is the workhorse for a seam that has to resist pull. Work small, even stitches on the right side or through the tape, keeping the line close to the edge. On a bunting flag the backstitch runs along the top edge, anchoring the flag to its binding. Stitches about 2–3 mm long, with the needle returning into the previous stitch, give a firm, nearly continuous line without the bulk of a machine seam. This is where the historic practice helps most: the visible stitch is not decorative, it is the load-bearing element.

Running stitch for side seams and light gathers

Running stitch suits the two slanted sides of a triangle when the fabric is stable and the flag is not expected to carry weight. It also gathers a light heading or eases a shaped point. Keep the stitches short enough that the fabric cannot fray open between them. On a loose-weave cotton, that means smaller stitches than on a tight quilting cotton. Running stitch is faster, but it is not interchangeable with backstitch on the top edge.

Whipstitch or overcast for closing and edge finishing

Whipstitch joins two folded edges or closes a turned opening. On bunting it is useful for closing the gap at the top of a flag after turning it right side out, and for securing the folded side edges of a two-layer pennant. Small, evenly spaced stitches worked over the fold keep the edge flat. Overcast stitch does a similar job on a raw or lightly frayed edge that will be hidden inside a binding or lining.

Blanket stitch for a visible, tidy edge

Blanket stitch makes a decorative and serviceable edge on felt pennants or on heavier fabric where a turned hem would be too bulky. Work it along the two slanted sides, spacing the stitches evenly, and keep the vertical bar of each stitch the same height. This is one place where a visible hand stitch improves the finished look rather than merely holding it together. It also explains a historic habit: banner makers used strong, visible edge stitches as part of the object's design, not as a hidden necessity.

Matching hand stitches to fabric and bunting type

A one-layer flag with a folded and stitched hem behaves differently from a two-layer flag sewn right sides together and turned. The one-layer version needs its side seams finished before hanging, usually with a double fold or a narrow facing. The two-layer version hides its side seams but creates bulk at the point. Choose your stitch accordingly:

  • Light quilting cotton, two layers turned: backstitch the top edge to the tape; running stitch or whipstitch the point if it needs closing.
  • Linen or medium cotton, one layer: backstitch the top edge and use overcast or blanket stitch on the slanted sides.
  • Felt or wool-blend pennants: blanket stitch edges and a firm backstitch at the top join; avoid tight running stitches that can distort the felt.
  • Lined or faced bunting: running stitch for internal seams and whipstitch to close the turning gap; backstitch only where the tape meets the flag.

The historic lesson is not to copy an old pattern exactly. It is to separate the decorative edge from the structural seam. Bunting looks simple, but the top join is a joint under repeated light load, and hand stitches should be chosen with that in mind.

Preparing the pennants before the hanging line

Cutting and finishing each flag as a separate unit gives the hand sewer control. A common working size is a flag about 15 cm wide at the top and 20 cm deep at the point, with a seam allowance of about 6 mm. These are working dimensions, not a universal rule; the finished size depends on the bunting's use and the space it will hang in. What matters is consistency: cut all flags to the same finished size and add the same allowance to each.

For a two-layer flag, place the outer fabric and lining right sides together, sew the two slanted sides with a running stitch or backstitch, clip the point, turn, and press. Then close the top edge with a narrow fold or leave it open to be caught inside the tape. For a one-layer flag, turn and stitch the slanted sides first, then press. A small template cut from card or template plastic keeps the triangles identical and saves repeated measuring. A rotary cutter and ruler speed up the cutting, but sharp dressmaking shears and a marked line work just as well on a few flags.

Joining flags to tape or binding

Space the flags evenly along a tape, binding strip or wide ribbon, leaving enough tape at each end for hanging. Fold the tape over the flag top so it covers the raw edge, then backstitch through all layers close to the tape's lower fold. Work from one end to the other, keeping the spacing consistent. A backstitch line here does two jobs: it attaches the flag and it prevents the tape from rolling under the flag's weight. For a lighter, quicker version, a running stitch through the tape works on a short indoor length, but backstitch is the better choice for bunting that will be handled, hung outdoors briefly or used repeatedly.

Use a needle appropriate to the fabric: a sharp or quilting needle in a size that passes through the tape and flag without bending. Hand-sewing thread should match the fabric weight; heavy thread on fine cotton can pucker the seam. Beeswax or thread conditioner can reduce tangling on longer lengths, and a small clip or pin holds the flag in place while you stitch.

What the historic method teaches about finish

Historic bunting and pennant making treated the flag as a small constructed object: edges finished, point shaped, then attached. That sequence prevents the common modern shortcut of stitching flags directly onto a long tape and hoping the raw edges stay put. The hand stitches that make the difference are not exotic. Backstitch for the hanging line, running stitch for the sides, whipstitch for closures and blanket stitch for a visible edge cover the whole project.

Choosing a slightly better tape, a stable quilting cotton and a needle that suits the cloth gives the hand sewer a result that hangs straight and survives storage between uses. The flags can be made in a coordinated set from a few fat quarters, or from a single length of fabric for a more formal look. Either way, the construction decision is the same: finish each flag, then join it with a stitch strong enough for the pull.

Back to blog

Useful Supplies for This Topic

Bring fabric, measuring and stitching tools together for your next sewing project.

Supplies, practical uses and Amazon links
SupplyWhat it helps withView
Cotton quilting fabric bundlePrepare cotton fabric pieces for patchwork and small sewn projects.Amazon
Fabric cutting shearsCut fabric with a dedicated pair of tailoring scissors.Amazon
Rotary cutter, mat and ruler setMeasure and cut straight fabric pieces on a suitable cutting surface.Amazon
Hand-sewing kitGather basic needles, thread and small hand-sewing tools.Amazon
Tailor's chalkMark cutting and stitching positions on suitable fabric.Amazon
Steam ironPress seams and folded edges during a sewing project.Amazon

As an Amazon Associate I earn from qualifying purchases.

Explore Our Digital Guides

Follow a clear plan for organizing, making and finishing your next project with our practical digital guides.